A randomized clinical study evaluating the 30-month clinical performance of class II indirect restorations in endodontically treated teeth using ceramic, hybrid, and composite computer-aided design/computer-aided production blocks.

Context Background: In the literature, the information about which indirect material is the most appropriate for the restoration of endodontically treated teeth is insufficient. Therefore, studies evaluating the clinical performance of root canal-treated teeth will shed light on this issue for clinicians. Aim: This clinical study aimed to evaluate the clinical performances of class II indirect restorations using ceramic, hybrid, and composite blocks to endodontically treated teeth. Materials and Methods: A total of 60 indirect class II restorations were performed in 51 patients using Cerasmart (GC Dental Products Europe, Leuven, Belgium) composite, IPS e.max computer-aided design CAD (Ivoclar Vivadent, Schaan, Liechtenstein) ceramic, and Vita Enamic (Vita Zahnfabrik, Bad Sackingen, Germany) hybrid blocks. All the restored teeth had root canal treatment. The restorations were evaluated using modified FDI criteria for 30 months. Statistical Analysis Used: The data were analyzed using Kruskal-Wallis analysis and Friedman two-way analysis of variance. Results: A total of 53 restorations of the 60 restorations could be followed up at the end of 30 months. No statistically significant difference was observed between the groups after 30 months in terms of all criteria evaluated (P > 0.05). Conclusion: Composite, ceramic, and hybrid blocks showed successful clinical performance in endodontically treated posterior teeth with large material loss.

Dentin bond strength and antimicrobial activities of universal adhesives containing silver nanoparticles synthesized with Rosa canina extract.

OBJECTIVE: The purpose in the study was to evaluate the effect of biogenic silver nanoparticles (Ag NPs) synthesized by the green synthesis method on dentin bond strength in three different universal adhesives and investigate their antibiofilm activity against Streptococcus mutans (S. mutans). MATERIALS AND METHODS: Three different universal adhesives (single bond universal, all-bond universal, and clearfil universal) were used in this study. Ag NPs were synthesized using rose hip (Rosa canina) extract as a reducing and stabilizing agent and they were characterized with STEM, UV-vis spectrophotometer, DLS, and zeta potential. Ag NPs were added to the adhesive resins at a rate of 0.05% (w/w), and their homogeneous distribution in the adhesive was determined using EDX spectrometry. Samples in all groups were tested at baseline-after 5000 and 10,000 thermal cycles. Adhesive composite discs were used for the live/dead analysis of S. mutans, MTT metabolic activity test, lactic acid production, and determination of colony-forming unit (CFU) values (n = 3). Ninety extracted caries-free human third molars were used to determine microtensile bond strength (µTBS) (n = 10). After the universal adhesive was applied to the dentin surface, composite resin (Z550 XT, 3 M ESPE, USA) was placed and sections were taken to form a composite-dentin stick of 1 mm × 1 mm wideness and 8-mm length. The sticks were broken at a rate of 1 mm/min under uniaxial tension in a universal testing machine, and the failure modes were determined by SEM. One-way analysis of variance (ANOVA) for antibacterial tests and two-way analysis of variance for µTBS tests were performed (p < 0.05). RESULTS: All universal adhesive groups containing Ag NPs showed higher antibacterial activity than control groups without Ag NPs (p < 0.05). There was a statistically significant difference in the live/dead assay analysis, MTT metabolic activity test, lactic acid production, and CFU values in the thermal cycled Ag NPs groups (p < 0.05). Antibacterial activity decreased in groups containing Ag NPs subjected to 10,000 thermal cycles. The highest lactic acid production 11.06 (± 0.629) and CFUs 7.61 (± 0.304), live bacteria 31.13 (± 0.466), and S. mutans MTT metabolic activity 0.29 (± 0.376) at AU (All-Bond Universal-Ag NPs) 10,000 thermal cycles group. There was no difference in µTBS values between the initial and 5000 thermal cycle groups, there was a difference between the 10,000 thermal cycle groups. The CU (Clearfil Universal-Ag NPs) group subjected to 10,000 thermal cycles showed lower µTBS 11.1 (± 3.2). CONCLUSION: In conclusion, universal adhesives containing biogenic Ag NPs showed higher antibacterial activity than the control groups and did not reduce the µTBS. CLINICAL RELEVANCE: Antibacterial universal adhesives can contribute to restoration success in clinical applications by reducing residual bacteria and preventing secondary caries formation.

Evaluation of the antibacterial activity of dental adhesive containing biogenic silver nanoparticles decorated nanographene oxide nanocomposites (Ag@nGO NCs) and effect on bond strength to dentine.

Our study aimed to evaluate the antibacterial activities and dentin bond strengths of silver nanoparticles (Ag NPs) and silver nano-graphene oxide nanocomposites (Ag@nGO NCs) produced by green and chemical synthesis methods added to the dental adhesive. Ag NPs were produced by green synthesis (biogenic) (B-Ag NPs) and chemical synthesis methods (C-Ag NPs) and deposited on nGO (nano-graphene oxide). Ag NPs and Ag@nGO NCs (0.05% w/w) were added to the primer and bond (Clearfil SE Bond). Group 1: control, Group 2: nGO, Group 3: B-Ag NPs, Group 4: B-Ag@nGO NCs, Group 5: C-Ag NPs, Group 6: C-Ag@nGO NCs. Streptococcus mutans (S. mutans) live/dead assay analysis, MTT metabolic activity test, agar disc diffusion test, lactic acid production, and colony forming units (CFUs) tests were performed. Bond strength values were determined by the microtensile bond strength test (µTBS). Failure types were determined by evaluating with SEM. Statistical analysis was performed using one-way ANOVA and two-way ANOVA (p < 0.05). There was a difference between the groups in the viable bacteria ratio and lactic acid production tests (p < 0.05). When the inhibition zone and S. mutans CFUs were evaluated, there was no difference between Group 3 and Group 4 (p > 0.05), but there was a difference between the other groups (p < 0.05). When the metabolic activity of S. mutans was evaluated, there was a difference between Group 1 and other groups, and between Group 2 and Group 5, and Group 6 (p < 0.05). There was no difference between the groups in the µTBS values (p > 0.05). As a result, although the antibacterial activity of B-Ag NPs and B-Ag@nGO Ag NPs obtained by green synthesis is lower than that of chemically synthesis obtained C-Ag NPs and C-Ag@nGO NCs, they provided higher antibacterial activity compared to the control group and did not reduce µTBS. The addition of biogenic Ag NPs to the adhesive system increased the antibacterial effect by maintaining the bond strength of the adhesive. Antibacterial adhesives can increase the restoration life by protecting the tooth-adhesive interface.

The effect of propolis on the bond strength of composite resin to enamel after intracoronal bleaching with different bleaching agents.

This study evaluated the effect of propolis as an antioxidant agent on bond strength to enamel after intracoronal bleaching. A total of 160 incisors were endodontically treated. Sixteen teeth were served as control, and the remaining teeth were randomly divided into three main groups according to the bleaching agent used; group 1: Sodium perborate (SP); group 2: Carbamide peroxide (CP); group 3: Hydrogen peroxide (HP). After bleaching, the samples were divided into three subgroups; subgroup A: no antioxidant agent application, subgroup B: sodium ascorbate (SA), subgroup C: propolis (PP). After the antioxidant agents application, the sample's surfaces were washed and dried. After adhesive application, composite resin cylinders were applied to enamel surfaces using tygon tubes and a shear bond strength test was performed. The use of PP significantly decreased the bond strength of composite resin to the enamel (p < 0.05). Using propolis as an antioxidant agent adversely affects the bond strength to enamel after intracoronal bleaching.

The Effect of Resin Infiltration on the Progression of Proximal Caries Lesions: A Randomized Clinical Trial.

OBJECTIVE: The aim of this clinical trial was to assess the effect of resin infiltration on the progression of proximal caries lesions. SUBJECTS AND METHODS: Forty-one patients, aged between 15 and 33 years, with 2 or more non-cavitated proximal caries lesions were included. In 41 of the adolescent and young adults, 45 pairs of proximal lesions with radiological extension into the inner and outer half of the enamel, or into the outer third of the dentin, were randomly allocated to the test groups (resin infiltration application + fluoridated toothpaste and flossing use) or to the control group (fluoridated toothpaste and flossing use). Standardized geometrically aligned digital bitewing radiographs were obtained using individual biting holders. The radiographic progression of the lesions was assessed after 1 year by digital-subtraction radiography. The McNemar test was used for statistical analysis. RESULTS: In the test group 1/45 of the lesions (2.2%) and in the control group 9/45 of the lesions (20%) showed progression. The caries progression rate of the control group was significantly higher than that of the test group (p < 0.05). CONCLUSIONS: Resin infiltration of proximal caries lesions is effective in reducing progression of the lesion.

A randomized, prospective clinical study evaluating effectiveness of a bulk-fill composite resin, a conventional composite resin and a reinforced glass ionomer in Class II cavities: one-year results.

OBJECTIVES: Bulk-fill restorative materials such as bulk-fill composite resins and high viscous glass ionomer cements have become very popular materials in operative dentistry because their application is easy and time-saving. The aim of this clinical study was to evaluate the clinical performance of a highly viscous reinforced glass ionomer material, a bulk-fill composite resin and a micro hybrid composite resin in Class II restorations. METHODOLOGY: In total, 109 Class II restorations were performed in 54 patients using three different restorative materials: Charisma Smart Composite (CSC); Filtek Bulk Fill Posterior Restorative (FBF); Equia Forte Fil (EF). Single Bond Universal adhesive (3M ESPE, Germany) was used with composite resin restorations. The restorations were evaluated using modified USPHS criteria in terms of retention, color match, marginal discoloration, anatomic form, contact point, marginal adaptation, secondary caries, postoperative sensitivity and surface texture. The data were analyzed using Chi-Square, Fischer's and McNemar's tests. RESULTS: At the end of one year, 103 restorations were followed up. No changes were observed during the first 6 months. At the end of one year, there were small changes in composite restorations (FBF and CSC) but no statistically significant difference was observed between the clinical performances of these materials for all criteria (p>0.05). However, there was a statistically significant difference between EF, FBF and CSC groups in all parameters except marginal discoloration, secondary caries and postoperative sensitivity in one-year evaluation (p<0.05). CONCLUSION: Bulk-fill composite resins and conventional composite resins showed more successful clinical performance than highly viscous reinforced glass ionomers in Class II cavities.

Efficacy of different endodontic irrigation protocols on shear bond strength to coronal dentin.

AIM: The purpose of this study was to evaluate the effect of etidronic acid on bond strength to coronal dentin. MATERIALS AND METHODS: A total of 75 human mandibular molars were sectioned 3 mm below the occlusal surface and then randomly divided into five groups according to irrigation solution used (n = 15): Group 1: 5 ml 2.5% sodium hypochlorite (NaOCl) +5 ml distilled water; Group 2: 5 ml 2.5% NaOCl + 5 ml 17% ethylenediaminetetraacetic acid (EDTA); Group 3: 10 ml mixture of 5% NaOCl and 18% 1-hydroxyethylidene-1,1-bisphosphonate (HEBP); Group 4: 5 ml mixture of 5% NaOCl and 18% HEBP + 5 ml 17% EDTA; and Group 5: 5 ml mixture of 5% NaOCl and 18% HEBP + 5 ml distilled water. Thereafter, Clearfil SE bond was applied to the dentin surfaces and then, composite build-ups were created using Tygon tubes for the microshear bond strength test. Data were analyzed using the one-way analysis of variance and Tukey test. RESULTS: When compared to Groups 3, 4, and 5, Groups 1 and 2 showed significantly higher bond strength values (P < 0.05). However, there was no statistically significant difference between Groups 1 and 2 and between Groups 3, 4, and 5 (P > 0.05). CONCLUSION: HEBP adversely affected the bond strength of the tested adhesive to coronal dentin.

A randomized, prospective clinical study evaluating effectiveness of a bulk-fill composite resin, a conventional composite resin and a reinforced glass ionomer in Class II cavities: one-year results

Abstract Bulk-fill restorative materials such as bulk-fill composite resins and high viscous glass ionomer cements have become very popular materials in operative dentistry because their application is easy and time-saving. Objectives: The aim of this clinical study was to evaluate the clinical performance of a highly viscous reinforced glass ionomer material, a bulk-fill composite resin and a micro hybrid composite resin in Class II restorations. Methodology: In total, 109 Class II restorations were performed in 54 patients using three different restorative materials: Charisma Smart Composite (CSC); Filtek Bulk Fill Posterior Restorative (FBF); Equia Forte Fil (EF). Single Bond Universal adhesive (3M ESPE, Germany) was used with composite resin restorations. The restorations were evaluated using modified USPHS criteria in terms of retention, color match, marginal discoloration, anatomic form, contact point, marginal adaptation, secondary caries, postoperative sensitivity and surface texture. The data were analyzed using Chi-Square, Fischer's and McNemar's tests. Results: At the end of one year, 103 restorations were followed up. No changes were observed during the first 6 months. At the end of one year, there were small changes in composite restorations (FBF and CSC) but no statistically significant difference was observed between the clinical performances of these materials for all criteria (p>0.05). However, there was a statistically significant difference between EF, FBF and CSC groups in all parameters except marginal discoloration, secondary caries and postoperative sensitivity in one-year evaluation (p<0.05). Conclusion: Bulk-fill composite resins and conventional composite resins showed more successful clinical performance than highly viscous reinforced glass ionomers in Class II cavities.

Effects of different resin sealing therapies on nanoleakage within artificial non-cavitated enamel lesions.

The aim of this study was to evaluate nanoleakage within the different lesion-sealing therapies applied to artificial non-cavitated enamel lesions. Thirty-two human anterior teeth were used. Artificial subsurface enamel lesions were produced on the labial surfaces of teeth. The specimens were then randomly divided into three groups (n=10): Group I- Clinpro Sealant application; Group II- ExciTE F adhesive resin application; and Group III- ICON resin infiltrant application. Each group was further divided into two subgroups: control and thermocycler. Nanoleakage was calculated by the digital image analysis software. In the control and thermocycled groups, there was no statistically significant difference between the Groups I, II, and III (p>0.05). The only significant leakage scores were obtained between the Group III control and thermocycler groups (p=0.027). ICON infiltrant can be used as an alternative to dental adhesives and fissure sealants in the sealing of initial non-cavitated enamel lesions. But the resin may become more affected by the water sorption than other resin materials over time. More studies are needed to evaluate long-term durability of resin infiltrants.

Genotypes and virulence factors of Candida species isolated from oralcavities of patients with type 2 diabetes mellitus.

BACKGROUND/AIM: This study compared the genotypes and virulence factors of Candida species isolated from oral cavities of healthy individuals and patients with diabetes mellitus (DM). MATERIALS AND METHODS: A total of 142 healthy individuals and 73 diabetic patients participated in this study. Study populations were classified into 4 groups as follows: Group I - Healthy, without caries; Group II - Healthy, with caries; Group III - DM, with caries; Group IV - DM, without caries. Diabetic patients' blood glucose and hemoglobin A1c concentrations were determined. Identification of Candida species was performed with conventional methods. Biofilm production, proteinase, phospholipase, and esterase were analyzed. The genetic diversity of Candida species was established using rep-PCR. RESULTS: The most isolated species was Candida albicans. There were statistical differences in terms of isolated Candida frequency between healthy subjects and diabetic patients. There was no statistical difference between the virulence factors of groups. Twelve genotypes were determined. While there were statistical differences in aerobe biofilm production, proteinase, and phospholipase activity between genotypes, there were no statistical differences in anaerobe biofilm production and esterase activity between genotypes. CONCLUSION: Diabetes has no effect on the activities of virulence factors of Candida species. Different genotypes of Candida albicans exhibited different virulence activities.

Erratum to: Effect of resin infiltration on enamel surface properties and Streptococcus mutans adhesion to artificial enamel lesions.

Authors would like to add ACKNOWLEGMENT in this article, page 30, between CONCLUSION and REFERENCES as below. ACKNOWLEGMENT: This research was supported by Erciyes University Scientific Research Project Department.

Effect of resin infiltration on enamel surface properties and Streptococcus mutans adhesion to artificial enamel lesions.

The aim of this study was to evaluate and compare the effects of resin infiltration and sealant type on enamel surface properties and Streptococcus mutans adhesion to artificial enamel lesions. Artificial enamel lesions were produced on the surfaces of 120 enamel specimens, which were divided into two groups: Group A and Group B (n=60 per group). Each group was further divided into four subgroups (n=15 per subgroup) according to sealant type: Group I-Demineralized enamel (control); Group II-Enamel Pro Varnish; Group III-ExciTE F; and Group IV-Icon. In Group A, hardness and surface roughness were evaluated; in Group B, bacterial adhesion was evaluated. Icon application resulted in significantly lower surface roughness and higher hardness than the other subgroups in Group A. In Group B, Enamel Pro Varnish resulted in lowest bacterial adhesion, followed by Icon. This study showed that resin infiltration of enamel lesions could arrest lesion progress.

Effects of calcium hydroxide and propolis intracanal medicaments on bond strength of resin-based endodontic sealer as assessed by push-out test.

The aim of this study was to investigate the effects of calcium hydroxide (Ca(OH)2) and propolis intracanal medicaments on bond strength of AH Plus to root dentin. After chemomechanical instrumentation using Revo-S rotary system, three groups of root canal specimens were prepared: 10 root canals were left untreated as controls (G1), 10 received Ca(OH)2 intracanal medicament (G2), and another 10 received propolis intracanal medicament (G3). Canals were obturated with AH Plus and gutta-percha. After bond strength evaluation using micro push-out test, data were analyzed using ANOVA and Tamhane's test (p=0.05). At coronal and middle thirds, there were no significant differences in bond strength among the three groups (p>0.05). At apical third, G3 was significantly superior to G2 (p<0.05) and G1 (p<0.05), but there was no significant difference between G2 and G1 (p>0.05). Therefore, when AH Plus was used as the sealer in endodontic treatments, its combined use with propolis as an intracanal medicament seemed to result in favorable sealer-dentin interfacial bond strength.

The effect of a new-generation flowable composite resin on microleakage in Class V composite restorations as an intermediate layer.

AIM: To evaluate the effect of application a new-generation bulk-fill flowable composite resin as an intermediate material between composite resin and dental substrates on micro-leakage in Class V composite restorations. MATERIALS AND METHODS: A total of 144 Class V cavities were prepared in 72 human molars. Specimens were then randomly distributed among three groups according to adhesive system applied (Group 1: Clearfil SE Bond; Group 2: Adper Easy One; Group 3: Adhesive 200T), and each group was divided into three subgroups according to liner material used (Group A: No liner-control group; Group B: Aelite Flo LV, low viscosity microhybrid composite; Group C: Smart dentin replacement). All cavities were restored using resin composite (Aelite LS, low shrinkage posterior composite). Specimens were stained with 0.5% basic fuchsin and evaluated dye penetration. RESULTS: There was no significant difference in dye penetration was found between the control and the experimental groups. CONCLUSIONS: Micro-leakage is not affected by the application of either conventional or new-generation flowable composite resin as an intermediate material between composite resin and dental substrates.

Do blood contamination and haemostatic agents affect microtensile bond strength of dual cured resin cement to dentin?

OBJECTIVE: The purpose of this study was to evaluate the effects of blood contamination and haemostatic agents such as Ankaferd Blood Stopper (ABS) and hydrogen peroxide (H2O2) on the microtensile bond strength between dual cured resin cement-dentin interface. MATERIAL AND METHODS: Twelve pressed lithium disilicate glass ceramics were luted to flat occlusal dentin surfaces with Panavia F under the following conditions: CONTROL GROUP: no contamination, Group Blood: blood contamination, Group ABS: ABS contamination Group H2O2: H2O2 contamination. The specimens were sectioned to the beams and microtensile testing was carried out. Failure modes were classified under stereomicroscope. Two specimens were randomly selected from each group, and SEM analyses were performed. RESULTS: There were significant differences in microtensile bond strengths (µTBS) between the control and blood-contaminated groups (p<0.05), whereas there were no significant differences found between the control and the other groups (p>0.05). CONCLUSIONS: Contamination by blood of dentin surface prior to bonding reduced the bond strength between resin cement and the dentin. Ankaferd Blood Stoper and H2O2 could be used safely as blood stopping agents during cementation of all-ceramics to dentin to prevent bond failure due to blood contamination.

Effect of a plant-based hemostatic agent on microleakage of self-etching adhesives

Objective: This in vitro study evaluated the effect of Ankaferd Blood Stopper (ABS) contamination on the microleakage of one-step and two-step self-etching adhesives. Study design: Class V cavities were prepared at the cemento-enamel junction on both buccal and lingual surfaces of 60 freshly extracted human molars. Teeth were randomly assigned into three groups according to contamination material applied (Group I, no contamination; Group II, blood contamination; Group III, ABS contamination). In contaminated groups, one drop of blood and ABS solution was applied directly to the dentin surface and air-dried. Each group was further divided into two subgroups according to bonding agent used [Group A, Clearfil SE Bond (two-step self-etching adhesive); Group B, Adper Easy One (one-step self-etching adhesive)]. Adhesive materials were applied according to the manufacturers' recommendations. The specimens were restored using a universal microhybrid composite (Arabesk). After thermocycling (5000x, 5°C - 55°C) and immersion in a 0.5% basic fuchsin, dye penetration was evaluated under a stereomicroscope. Statistical analysis was performed with Kruskal-Wallis and Mann-Whitney U tests at p < 0.05. Results: Significantly higher microleakage scores were observed when one-step self-etching adhesive was applied to blood- and ABS-contaminated dentin. However, when a two-step self etching adhesive was used, microleakage was observed only following blood contamination, not following ABS contamination. Conclusions: Although, blood contamination before adhesive application resulted in increased microleakage with both one-step and two-step self-etching adhesive systems, ABS contamination did not affect microleakage when a two-step self-ething adhesive system was used (AU)

No disponible

Effect of a plant-based hemostatic agent on microleakage of self-etching adhesives.

OBJECTIVE: This in vitro study evaluated the effect of Ankaferd Blood Stopper (ABS) contamination on the microleakage of one-step and two-step self-etching adhesives. STUDY DESIGN: Class V cavities were prepared at the cemento-enamel junction on both buccal and lingual surfaces of 60 freshly extracted human molars. Teeth were randomly assigned into three groups according to contamination material applied (Group I, no contamination; Group II, blood contamination; Group III, ABS contamination). In contaminated groups, one drop of blood and ABS solution was applied directly to the dentin surface and air-dried. Each group was further divided into two subgroups according to bonding agent used [Group A, Clearfil SE Bond (two-step self-etching adhesive); Group B, Adper Easy One (one-step self-etching adhesive)]. Adhesive materials were applied according to the manufacturers' recommendations. The specimens were restored using a universal microhybrid composite (Arabesk). After thermocycling (5000x, 5°C - 55°C) and immersion in a 0.5% basic fuchsin, dye penetration was evaluated under a stereomicroscope. Statistical analysis was performed with Kruskal-Wallis and Mann-Whitney U tests at p < 0.05. RESULTS: Significantly higher microleakage scores were observed when one-step self-etching adhesive was applied to blood- and ABS-contaminated dentin. However, when a two-step self etching adhesive was used, microleakage was observed only following blood contamination, not following ABS contamination. CONCLUSIONS: Although, blood contamination before adhesive application resulted in increased microleakage with both one-step and two-step self-etching adhesive systems, ABS contamination did not affect microleakage when a two-step self-ething adhesive system was used.

Do blood contamination and haemostatic agents affect microtensile bond strength of dual cured resin cement to dentin?

Objective: The purpose of this study was to evaluate the effects of blood contamination and haemostatic agents such as Ankaferd Blood Stopper (ABS) and hydrogen peroxide (H2O2) on the microtensile bond strength between dual cured resin cement-dentin interface. Material and Methods: Twelve pressed lithium disilicate glass ceramics were luted to flat occlusal dentin surfaces with Panavia F under the following conditions: Control Group: no contamination, Group Blood: blood contamination, Group ABS: ABS contamination Group H2O2: H2O2 contamination. The specimens were sectioned to the beams and microtensile testing was carried out. Failure modes were classified under stereomicroscope. Two specimens were randomly selected from each group, and SEM analyses were performed. Results: There were significant differences in microtensile bond strengths (µTBS) between the control and blood-contaminated groups (p<0.05), whereas there were no significant differences found between the control and the other groups (p>0.05). Conclusions: Contamination by blood of dentin surface prior to bonding reduced the bond strength between resin cement and the dentin. Ankaferd Blood Stoper and H2O2 could be used safely as blood stopping agents during cementation of all-ceramics to dentin to prevent bond failure due to blood contamination.

Influence of Ankaferd Blood Stopper on shear bond strength of bonding systems.

This study investigated the effect of Ankaferd Blood Stopper (ABS) contamination on bond strength of total- and self-etching systems. Seventy mandibular third molars sectioned in a mesio-distal direction were mounted in acrylic resin, and flat dentin surfaces were exposed. The specimens were randomly assigned to seven groups (n=20), according to the surface treatment: Group I, ABS contamination+37% phosphoric acid+Solobond M; Group II, ABS contamination+Clearfil SE Bond; Group III, ABS contamination+All Bond SE; Group VI, 37% phosphoric acid+ABS contamination+Solobond M; Group V, Solobond M; Group VI, Clearfil SE Bond; and Group VII, All Bond SE. Next, a resin composite (Grandio) was built up using a plastic apparatus and polymerized. The specimens were tested in shear mode at a crosshead speed of 1 mm/min. There were significant differences in bond strengths between the control and ABS-contaminated samples. These findings suggest that ABS contamination reduced bond strength of total- and self-etching adhesives.

Comparison of the effects of Er,Cr:YSGG laser and different cavity disinfection agents on microleakage of current adhesives.

The aim of this study was to compare the effect of the Er,Cr:YSGG laser and different cavity disinfection agents on microleakage of an etch-and-rinse and a self-etch adhesive. Class V preparations were completed on the buccal and lingual surfaces of 30 extracted noncarious human molars. The occlusal margin was placed on enamel and the gingival margin on dentin. Preparations were randomly divided into five experimental groups (n = 12); (1) 2% chlorhexidine gluconate (CHX), (2) propolis, (3) ozone, (4) Er,Cr:YSGG laser, and (5) control (no treatment). Each group was divided into two subgroups according to the adhesive system: etch-and-rinse (Adper Single Bond 2), and a self-etch adhesive (All-Bond SE). The preparations were bulk-filled with a resin composite (Arabesk). After storage in distilled water for 24 h the restored teeth were subjected to thermocycling (1,000 cycles; 5-55°C). All specimens were immersed in 0.5% basic fuchsin solution for 24 h and sectioned longitudinally through the centre of the restorations and examined under a stereomicroscope at ×25 magnification. The data were analysed using the Kruskal-Wallis and Mann-Whitney U-tests. No difference was observed between the groups either on enamel or dentin when the etch-and-rinse adhesive was used (p > 0.05). In the self-etch adhesive groups, a significant difference was found only between the laser group and the CHX group on enamel and between the propolis group and the control group on dentin (p < 0.05). Comparing the etch-and-rinse and self-etch adhesives within each group, no differences were found on dentin (p > 0.05). On enamel, a statistically significant difference was found only in the CHX group (p < 0.05). There were no differences in microleakage with the laser and the different cavity disinfectant applications when used with etch-and-rinse adhesive. In the self-etch group there were differences in microleakage depending on the disinfection agent used.